Vestil ALL-T-2 Bedienungsanleitung PDF herunterladen (Seite 8)

Step 2

: Locate the shaft retaining pin; then remove it.

D. Locate the wheel shaft retaining pin,

which is identified with an arrow in photo D at

left. The retaining pin fixes the wheel shaft in

place, so that it cannot rotate or slide.

E. Before the wheel shaft can be removed,

the retaining pin must be removed. Tap the

retaining pin out of its channel as shown in

hoto E.

retaining pin

steering shaft

shaft retaining pin

Step 3

: Remove the wheel shaft, position the tow bar around the steering shaft and then reinstall the wheel shaft.

F. Tap and pull the wheel shaft out of its channel through the drive shaft (see

photo A below).

G. Position the connection end (see Fig. 1, p. 1) of the tow bar around the

steering shaft and align all of the shaft openings; then insert the wheel shaft.

F G

Step 4

: Remove the cross-link that connects the two sides of the tow bar with a flat blade screwdriver and a 1/4in.crescen

wrench

I. Remove the bolt

and nut that fix the

cross-link in place,

and then remove

the cross-link.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Vestil ALL-T-2 Bedienungsanleitung Seite 8