Vestil SP-175 Bedienungsanleitung PDF herunterladen

Revised 05-07 29-126-101

A company dedicated to solving ergonomic and material

handling problems since 1955

VESTIL MANUFACTURING CORPORATION

2999 North Wayne St., Angola, IN 46703

Phone (260) 665-7586 • Fax (260) 665-1339

E-mail: [email protected] • www.vestil.com

WORK PLATFORM

MODEL WP, WP-3737-FD and SP-175

OWNERS

MANUAL

Ergonomic Solutions

WORK PLATFORM

MODEL WP, WP-3737-FD and SP-175

Caster Installation ........................................... 5

Emergency Stop Option .................................. 6

Parts List ......................................................... 7

Warning Labels ............................................... 8

Contents

Warnings and Safety Instructions.................. 1

Operation Instructions ................................ 2-3

Receiving Instructions & Warranty ................ 4

Maintenance & Safety Checks ...................... 4

WARNINGS & SAFETY INSTRUCTIONS

Ensure that all employees understand and follow the

following instructions.

• Read and understand the owner’s manual before

using the work platform.

• Ensure that all safety and warning labels stay in

place and are legible. See the labels page in this

manual.

• Observe all applicable OSHA laws regulating the use

of this platform.

•

Warning:

Each person aboard the work platform must

wear appropriate fall prevention gear and keep it

tethered to the platform at the lanyard attachment

point at all times.

• The work platform cannot have a width greater than

the overall width of the fork truck being used

(measured across the load bearing tires) plus

250mm on either side.

See ASME/ANSI B56.1; 7.36.3(e).

• Ensure that the forks are fully inserted through both

sets of the fork pockets.

• Secure the work platform to the forklift mast before

use.

• Do not use the work platform if any damage to the

standing surface, the handrails, or any part of the

gate is observed.

• Do not use the work platform unless the fork tine

lock, securing chain, and gate latch are all in good

condition and functioning properly.

• The fork truck’s parking brake must be applied before

elevating the work platform.

• Never transport personnel in basket at any time.

Personnel are to be raised and lowered only.

• A fork truck carrying a work platform must only be

used on a firm and level finished surface in good

repair, and the truck’s forks must be kept level with

the ground at all times.

• Be alert for personnel moving underneath the

platform.

•

Warning:

Do not use any part of the gate, siderails, or

safety chains as a step, or as a support for leaning

out of the work platform.

•

Warning:

Never use the platform to lift or support any

type of structural load. It is to be used only to lift and

transport personnel along with their associated light

tools and equipment.

• Do not use the optional caster kit to support and / or

move the platform while personnel or equipment are

aboard. Always elevate the platform off the floor when

transporting equipment or personnel!

• Fork truck manufacturers are to be consulted when

accessories are used that affect the truck’s capacity

and safe operation. The stockpicker’s load-loss and

center-of-gravity will be made available on request.

See OSHA 1910.178(a)5.

SP-175

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - WORK PLATFORM

1Revised 05-07 29-126-101A company dedicated to solving ergonomic and materialhandling problems since 1955.VESTIL MANUFACTURING CORPORAT

Seite 2 - Locked Unlocked

2Lanyard attachment pointsWP- models’center of gravity(C.O.G.)Tine LockWelded AngleFork PocketOPERATION INSTRUCTIONS - WP, SPYou must read and underst

Seite 3 - OPERATION AND USE:

3LOADING THE PLATFORM:The model WP work platform and model SP stock picker are medium-duty platforms intended to be used with a sit-downrider, high li

Seite 4 - WARRANTY

4RECEIVING INSTRUCTIONSEvery unit is thoroughly tested and inspected prior to shipment. However, it is possible that the unit may incur damage duringt

Seite 5

51. Verify that the bottoms of all four of the platform’scorner handrail posts are undamaged and that thereis no foreign material plugging the inside

Seite 6 - INSTALLATION INSTRUC

61) Mount the supplied 4” square junction box with the short pig tail near the front of the fork truck (see figure“A”) using the 1/4”-20 x 1” machine

Seite 7 - PARTS IDENTIFICATION

7PARTS IDENTIFICATIONmodels WP-3636, WP-3648, WP-4848PARTS IDENTIFICATIONmodels WP-3636, WP-3648, WP-4848ITEM NO.12345678910DESCRIPTIONFRAME, WELDME

Seite 8 - WARNING LABEL IDENTIFICATION

8WARNING LABEL IDENTIFICATIONMAKE SURE ALL WARNING LABELS ARE IN PLACE!Most of our labels will be trilingual. The labels on the Fold Down Work Platfor

Kommentare zu diesen Handbüchern

Keine Kommentare

Vestil SP-175 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Vestil SP-175 herunter. Vestil SP-175 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vestil SP-175